Paladin-tools LAF3452 Manuel d'utilisateur télécharger pdf (Page 5)

SAFETY INSTRUCTIONS

WORK SAFELY - A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST ACCIDENTS !!

SECTION 1

WARNING SECTION

WARNING

Obey all the safety instructions listed in

this section and throughout this manual.

Failure to obey instructions in this

section could result in death or serious

injury.

BEFORE ATTEMPTING ANY TYPE OF ASSEMBLY,

OPERATION, MAINTENANCE, OR OTHER WORK ON

OR NEAR THIS PRODUCT:

x READ AND COMPLETELY UNDERSTAND THIS

MANUAL.

x READ AND COMPLETELY UNDERSTAND THE

MANUALS PROVIDED WITH YOUR POWER

UNIT, LOADER AND QUICK-ATTACH.

x Read and understand all safety signs on this

product and on your power unit, loader, and quick-

attach.

x Know all your controls and know how to quickly stop

all power unit movement, the Roto-Tiller movement,

and the engine in case of an emergency.

x Know and obey all applicable government rules,

O.S.H.A. regulations, local laws and other

professional guidelines for your operation.

x Make sure that anyone who will be assembling,

mounting, maintaining, repairing, removing, and/or

storing this product:

x has been instructed in the safe operation of this

product and

of the power unit and quick-attach

to which this product is attached.

x is physically and mentally capable of the safe

operation of this type of equipment.

x is not under the influence of drugs or alcohol.

x is carefully supervised from a safe distance,

especially if such person is inexperienced.

x wears appropriate protective equipment (i.e.

hardhat, safety glasses, work gloves, protective

shoes, respirator, ear protection, etc.).

x does not wear loose fitting clothing, loose or

uncovered hair, or any accessories (jewelry,

necktie, scarf, wrist watch, etc.) that can catch in

moving parts.

x has annually reviewed all safety instructions.

x Know and follow good work practices when

assembling, mounting, maintaining, repairing,

removing, and storing this product:

x Work on a level surface in a well lit area.

x Keep the area clean and dry.

x Use properly grounded electrical outlets & tools.

x Use the right tool for the job at hand.

x Make sure that your tools are in good condition for

performing the desired function.

x When using tools, wear the protective equipment

specified by the tool manufacturer. (i.e. hardhat,

safety glasses, work gloves, protective shoes, etc.)

WHEN YOUR POWER UNIT IS USED DURING ANY

TYPE OF ASSEMBLY, OPERATION, MAINTENANCE,

OR OTHER WORK ON OR NEAR THIS PRODUCT:

x Before leaving the operator’s station or before

beginning any type of work on this product, lower

this product to the ground, apply your power unit’s

parking brake, stop the engine, remove the starter

key, wait for all moving parts to stop, and then

relieve all pressure in the hydraulic lines. Refer to

your power unit’s operator’s manual for instructions

on how to relieve hydraulic pressure in lines.

x Know your loader’s safe lifting and operating

capacity and the weight of this product. See the

specifications in this manual for the weight of this

product and refer to your power unit’s and loader’s

operator’s manuals for safe operating limits. Lift

capacity may be reduced if using a quick-attach.

x Never allow anyone, except the operator, to be

around the power unit or this product when either is

in motion. Do not startup unless others are clear of

the work area.

x Do not allow riders on this product or the power unit.

x Do not stand or climb on this product when raised.

x Do not place any part of your body under any part of

this product unless this product is securely resting

on adequate blocking or on the ground.

x Do not use blocking made of concrete blocks, logs,

buckets, barrels or any other material that could

suddenly collapse or shift positions. Do not use

wood or steel blocking that shows any signs of

material decay. Do not use blocking that is warped,

twisted, or tapered.

x Never operate controls from the ground. Operate

the controls only from the operator’s station.

x Never leave equipment unattended with the engine

running or with this product raised on the loader.

x Be aware of the added weight and width of this

product. Reduce travel speeds accordingly,

especially when traveling over rough ground.

x Keep this product close to the ground and under

control when transporting.

1 2 3 4 5 6 7 8 9 10 ... 14 15

Commentaires sur ces manuels

Pas de commentaire

Paladin-tools LAF3452 Manuel d'utilisateur Page 5

Commentaires sur ces manuels