Paladin-tools LAF3452 Manuel d'utilisateur télécharger pdf (Page 6)

SAFETY INSTRUCTIONS

WORK SAFELY - A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST ACCIDENTS !!

WARNING SECTION

[CONTINUED]

WARNING

Obey all the safety instructions

listed in this section and throughout

this manual. Failure to obey

instructions in this section could

result in death or serious injury.

WHEN DEALING WITH HYDRAULICS DURING ANY

TYPE OF ASSEMBLY, OPERATION, MAINTENANCE,

OR OTHER WORK ON OR NEAR THIS PRODUCT:

x Hydraulic fluid under pressure can penetrate the

skin and cause serious injury or death. Hydraulic

leaks under pressure may not be visible!

x If any fluid penetrates the skin, GET IMMEDIATE

MEDICAL ATTENTION!!

x Wear safety glasses, protective clothing, and use a

sound piece of cardboard or wood when searching

for hydraulic leaks. DO NOT USE YOUR HANDS!

x Before connecting or disconnecting hydraulic hoses,

read your tractor or power unit’s operator’s manual

for detailed instructions on connecting and

disconnecting hydraulic attachments.

x Make certain that all parts meet the specifications for

this product when installing or replacing hydraulic

hoses or fittings.

x After connecting hydraulic lines:

x Slowly and carefully raise the loader and cycle

the rollback / dump cylinders to check hose

clearances and to check for any interference.

x Operate the hydraulics on this product to check

hose clearances and to check for any

interference.

x Make certain that the hoses cannot interfere with

or actuate the quick-attach mechanism.

x Make certain that hoses will not be pinched, or

get tangled, in any equipment.

x Do not lock the auxiliary hydraulics of your power

unit in the “ON” position.

x Refer to your power unit’s operator’s manual and

this manual for procedures and intervals, then

inspect and maintain the entire hydraulic system to

insure that the fluid remains clean, that all devices

function properly, and that there are no fluid leaks.

WHEN MOUNTING THIS PRODUCT TO YOUR

POWER UNIT:

x Refer to the operator’s manuals of your power unit,

your loader, and your quick-attach for special or

detailed mounting instructions.

x This product should fit onto the quick-attach or

loader arms of your power unit the same as the

original products that were designed by your loader /

quick-attach manufacturer.

x If this product does not fit properly, contact FFC

Attachments before operating.

x Never place your finger into the mounting plate or 3-

point hitch or loader holes. A slight movement of the

power unit or this product could cause serious injury.

BEFORE EACH USE, THOROUGHLY INSPECT THIS

PRODUCT AND:

x Make certain that all safety signs are in place and

legible. Refer to the safety sign page in this manual

for the placement of safety signs for this product.

x Replace all damaged or excessively worn parts and

hardware only with genuine FFC Attachments parts

or with properly rated fasteners, hydraulic hoses, or

fittings.

x Make certain that all locking pins, latches, and

connection devices are properly installed and

secured.

x Make certain that all protective guards, canopies,

doors, etc., are in place and secure.

WHEN OPERATING THIS PRODUCT IN

ACCORDANCE WITH DESIGN INTENTIONS:

x Keep everyone at least nine feet away from the unit

when operating.

WHEN ADJUSTING, SERVICING OR REPAIRING THIS

PRODUCT:

x Make no modifications to your Roto-Tiller.

x When making repairs, use only genuine FFC

Attachments parts or, for fasteners, hydraulic hoses,

or hydraulic fittings, use only properly rated parts.

x Replacement parts, for parts with safety signs

attached, must also have safety signs attached.

SECTION 2

CAUTION

Obey all the safety instructions listed in

this section and throughout this

manual. Failure to obey instructions in

this section may result in personal

injury.

x Do not use the top of this product as a step. Under

certain conditions, this area can be slippery.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Commentaires sur ces manuels

Pas de commentaire

Paladin-tools LAF3452 Manuel d'utilisateur Page 6

Commentaires sur ces manuels